DIY

Even using coupons, the back to school supply lists can take a toll on your weekly grocery budget. I found a couple neat ideas on reusing items around the house for school lunch supplies and can’t wait to try them out! These look like items even a non-crafty person like myself could successfully create!
This first idea is from Family Fun magazine. Don’t throw out those used milk jugs!

With just a few snips, you can create a set of cool, eco-friendly, reusable snack and sandwich containers from juice cartons and milk jugs. They’re food-safe, easy to rinse clean, and absolutely free, so it’s no biggie if they get tossed accidentally. Let your kids decorate the boxes with stickers and permanent markers for an even more personalized look.

1. SANDWICH BOX: Mark a clean 1-gallon milk jug as shown.
2. Cut along the lines with scissors. To make the crease lines, use a thumbtack to pierce a row of dots at 1/4-inch intervals across each side of the jug, 1 3/4 inches up from the bottom.

3. Fold the flaps at these dotted lines, then open them and fold them in the opposite direction along the lines (this will make the flaps easier for your kids to open and close). Fold up the box and add an adhesive-backed Velcro dot closure.

SNACK BOX: Use a clean juice or milk carton. Cut off the top, then cut the sides into flaps as shown. Carefully crease the flaps, then fold them down and add an adhesive-backed Velcro dot closure.
These cute bags made out of Capri Sun juice pouches are popping up everywhere. Why not make a lunch totes for your kids?! Save $ and learn how to make them here.

I think these would also make a fantastic reusable grocery bag! This is one my friend Ginny made. {Insert shameless plug for Ginny to make me one for my birthday! }
Do you have a creative idea on how to save money be reusing an item? Please share! I love hearing new thoughts and ideas!

Leave a Comment: 0 comments

Filed Under: DIY, Guest post, Ideas for Entertaining kids, Thrifty Craft Ideas, Thrifty Gift Ideas, Thrifty Gifts, Thrifty tips

Disclaimer: This post may or may not contain affiliate links.
SUBSCRIBE and never miss a thing!

Well it’s Matt. My whole life I have been the type to try and figure things out for my self. I love trying to make things that many think is too hard. Well about 6-8 years ago I was watching a show on making cheese, and I thought – I can do that. So I searched the internet and found a kit to make cheese from home. It is actually pretty easy to make mozzarella cheese. Every now and then I break out the kit I bought 8 years ago and make a pound of cheese for pizza or cheese on tomatoes, or just for fun.

DIY - mozzarella cheese

DIY - mozzarella cheese

To make one pound of cheese you need one gallon of milk. We had two different milks that were both about half full that I added together. They were close to expiring and I had just bought new milk. So in the pot they went.

Here is how:

You need a cheese making kit. The one I have had I have made about 6 pounds of cheese and I haven’t even used 1/4 of the ingredients. It keeps well in the back of the fridge.

One cheese making kit - Rennet, Calcium Chloride, Citric Acid, Mild Lipase Powder, Flaked salt

One cheese making kit - Rennet, Calcium Chloride, Citric Acid, Mild Lipase Powder, Flaked salt

The one I used is from Leeners – $24.95
Leeners Mozzarella and Ricotta Cheese Making Kit
Or this one for $18.50 – I haven’t used this but I’m sure it’s similar.
Roaring Brook Dairy Mozzarella Cheesemaking Kit

Follow the instructions but basically you need:

  • pot large enough to hold a gallon of milk,
  • One Gallon of milk (whole milk is best – cheese needs high fat content)
  • One cheese making kit – Rennet, Calcium Chloride, Citric Acid, Mild Lipase Powder, Flaked salt
  • large spoon with holes for draining
  • 5 small bowls to have everything pre-measured
  • a large microwave safe bowl
  • thick rubber gloves (I used 5 pair of latex gloves but the thick rubber kitchen gloves would work too, clean)
  • one cooking thermometer

 

Start by pouring 1 (one) gallon of milk into the pot. Whole milk is best cheese is better with higher fat content. I have even made it from raw milk at Sarah’s parents house, they are dairy farmers. Some risk involved with raw milk.

Slowly warm the milk on low to medium heat. Slower the better, scalded or burnt cheese probably doesn’t taste that good.

While the milk is warming start preparing the additives

In one small bowl add

1/2 tsp of Rennet with 1/4 cup of distilled (I use tap) water

Next bowl :

1 tsp calcium chloride liquid mix with 2 Tbs of distilled (or tap) water

Next Bowl:

Measure 2 tsp of citric acid powder

Next Bowl:

Measure 1/2 tsp of Flaked salt. To be added while stretching the cheese in the last process

Next Bowl :

Measure 1/4 to 1/2 tsp of mild lipase powder. Optional if you are vegetarian.

DIY - Mozzarella cheese - Milk with Citric Acid, curd forming

DIY - Mozzarella cheese - Milk with Citric Acid, curd forming

Closely watch the temperature of the warming milk. Add the citric acid while it is warming. Stir the citric acid for 30 seconds.  You will begin to see the milk separate and form curds. Continue to  stir once every minute or so. Once it reaches 88 degrees F add the calcium chloride mixture and the lipase powder. Stir the mixtures slowly for 30 seconds. Let the mixture continue to warm to 105 degrees F.

DIY - Mozzarella cheese - 105 degrees, Citric Acid, Rennet, Mild Lipase Powder

DIY - Mozzarella cheese - 105 degrees, Citric Acid, Rennet, Mild Lipase Powder

Once 105 degrees F has been reaches cover and turn off the heat. Let the whey and curd mixture sit at 105 F for 15 minutes to allow the curd to fully develop. The curd is the white clumps and the whey is the greenish clear liquid in the pot.

DIY - Mozzarella cheese - Cover and let sit with heat off

DIY - Mozzarella cheese - Cover and let sit with heat off

After 15 minutes gently take out the curd with the slotted spoon. Put the curd into your microwave safe bowl. Try and remove as much curd from the whey as you can.

DIY - Mozzarella cheese - After 15 minutes remove the curd, place into microwave safe bowl

DIY - Mozzarella cheese - After 15 minutes remove the curd, place into microwave safe bowl

Gently press the curd mixture with your gloves on. Pore the whey back into the pot. Press and pour this step until not much is being squeezed out.

DIY - Mozzarella cheese - press out as much whey by hand

DIY - Mozzarella cheese - press out as much whey by hand

Now place the bowl with the curd mass into the microwave. Heat on High for ONE minute. Remove and press the mass to try and remove any more whey liquid as you can. Repeat this pressing and pouring till no more whey can be removed – about 30 seconds or so.

DIY - Mozzarella cheese - Place in microwave, cook on high one minute

DIY - Mozzarella cheese - Place in microwave, cook on high one minute

Place back into the microwave for ONE minute again. Remove the cheese and press and pull the cheese similar to making taffy. Add the remaining flake salt while you are pulling and stretching the cheese. The more you pull the firmer and stringing it will become.

DIY - Mozzarella cheese - Continue to squeeze the whey out, place in microwave again for one minute

DIY - Mozzarella cheese - Continue to squeeze the whey out, place in microwave again for one minute

DIY - Mozzarella cheese - Add the Flaked Salt and stretch and pull cheese

DIY - Mozzarella cheese - Add the Flaked Salt and stretch and pull cheese

This is where I stopped microwaving it, but for a more firm cheese repeat the microwave step again.

At this point the cheese is very hot and this is where thick gloves comes in handy. I wore 5 latex gloves on each hand and it was still VERY hot.  Stretch and pull the cheese just like taffy makers. The more you pull and stretch it the more stringing and firm it becomes. For a softer cheese only pull and stretch for a short time, maybe one or two pulls then form your cheese ball.

DIY - Mozzarella cheese - Stretch and Pull the cheese and work the curd together

DIY - Mozzarella cheese - Stretch and Pull the cheese and work the curd together

Form the cheese the way you want, place in an air tight container. In the fridge it is good for about one week, and in the freezer for about a month.

DIY - Mozzarella cheese - Form a tight cheese ball with the flat of your palm and press your fingers upward on the bottom middle of the cheese mass.

DIY - Mozzarella cheese - Form a tight cheese ball with the flat of your palm and press your fingers upward on the bottom middle of the cheese mass.

If the cheese is too soft to grate, place in the freezer to firm the cheese for grating. ENJOY!

How do you like your cheese?

 

DIY - Mozzarella cheese, Tomato, Olive Oil, Salt and Pepper, Basil

DIY - Mozzarella cheese, Tomato, Olive Oil, Salt and Pepper, Basil

Leave a Comment: 15 comments

Filed Under: A Thrifty Dad, DIY, Recipes, Thrifty Craft Ideas, Thrifty tips

Tags:

Disclaimer: This post may or may not contain affiliate links.
SUBSCRIBE and never miss a thing!

Discounts at Home Depot

07/27/2011 6:02 pm · 0 comments



Save like I do on all of my home remodeling. I signed up for this through Home Depot last year and have gotten discounts and offers they don’t offer in the paper! Click Image above

Leave a Comment: 0 comments

Filed Under: A Thrifty Dad, DIY

Disclaimer: This post may or may not contain affiliate links.
SUBSCRIBE and never miss a thing!

atmgraphiclook

Thanks to Emily at Saving with a Plan for passing along this thrifty tip on how to stain your concrete floors.  Oh my word… I totally feel in love with this idea, and it looks amazing!  If you would like to be a featured guest post on Look What I Made , watch for our weekly post each Tuesday called A Thrifty online craft fair, link up and you may be selected for our weekly feature post.

Earlier this year we adopted a dog from our local rescue group C.A.R.E.. this dog was not house trained and in our efforts to “convert” him he chewed a massive hole in our living room carpet all the way through the padding. We didn’t want to replace this with more carpet and didnt want the expense of tile or wood floors. We looked at so many options and then ran across information on stained concrete floors. We completed the process which I will show you below and it turned out amazingly well. It would have cost us over $3000 for new carpet and more than that for tile or wood floors and we purchased the items needed to stain the concrete ourselves and instead got the job done for less than $600 and have ended up with a much better outcome in my opinion. No more renting carpet cleaner or freaking out when something is spilled, I just wipe it up and move on!

Here are some visuals of different points in our project. The first step is to remove the existing carpet and padding and then thoroughly clean the floors.

So here we are with bare concrete floors after removing the tack strips and yes that is my huge black dog enjoying the cool concrete. The most amusing factor of the whole project was watching my husband try to use a buffer.

As you can see the tape we laid the lines down to make this look like tile/marble and we did not want to actually cut grout lines into our concrete as we didn’t want our house filled with concrete dust. Always follow the directions on your stain, not following directions caused us to have to do the staining process twice. Here is the result after the second round.

We were finally satisfied with the color so we removed the tape, sealed and waxed the floors after they had completely dried, and there we have the end result. I used a stencil and gold paint to accent the border. In all it took 5 days and it’s pretty maintenance free from there. I do have to re-seal and wax mine occasionally because of my dogs.

Leave a Comment: 15 comments

Filed Under: DIY, Look What I Made

Disclaimer: This post may or may not contain affiliate links.
SUBSCRIBE and never miss a thing!

So I follow Tinkernut.com on Youtube, and I just saw his new video on making a personalized Christmas photo cube that folds in tons of directions, each showing something different. 10 photos in all. He designed a template that you can download to help design your photos and shows you where to cut them.

Also the items needed are:

Photo paper with sticky on the back- this way you can stick the photos to your blocks

8 blocks – he used 3/4 inch blocks – and the template is for 3/4 inch.

10 photos – of whatever you want to be on the blocks

Tinkernut.com template for your photos

And a few minutes of your day to make something unique, memorable and home made!

Leave a Comment: 1 comment

Filed Under: A Thrifty Dad, DIY, Thrifty Christmas, Thrifty Craft Ideas, Thrifty Gift Ideas

Disclaimer: This post may or may not contain affiliate links.
SUBSCRIBE and never miss a thing!

atmgraphicchristmas

Each day we will be posting A Thrifty Christmas Tip, from our readers. At the end of the month, one of you will win a $100.00  Gift Card. For all the details click here. Keep those thrifty tips coming!!!

Thanks to LilKim for todays Thrifty Tip,

Just wanted to share a gift we made for Christmas this year – Clocks out of NES games! (I always find it super hard coming up with ideas for the teen/20 something guys on my list – brothers!!!

Materials
NES games – super cheap. Check craigslist, used game stores, ebay, or yard sales/flea markets.
Clock Kit – I used my amazon gift cards from swagbucks to get these for FREE. The video games are 3/4″ thick, so you’ll need a clock kit that will fit that size clock face.

Drill/Bits – The drillbit I used was 5/16″ – it was the perfect size for my clock kit.
Glue - (Don’t use the Amazing Goop I have pictured here) it didn’t work for me at all….except to make an amazing goopy mess! Instead, use a super adhesive for nonporous surfaces at pretty much any store.

Spray Paint – .99 I took offense to the metal colored clock hands and plumbing pieces. If you don’t, you can skip this!

<——Plumbing pieces – $1.19 for 4. I used something called a 1.25″ one hole EMT strap (you’ll need 2 per clock). I found it in the plumbing/electrical aisle at Lowe’s. They just screamed clock backs to me. I like the “modernist” look to them. As you can see, these 2 plumbing pieces have been cured and are no longer offending me by being silver colored.
First, measure where you want your clock pieces to go and mark the center so you know where to drill your hole. Like I said, 5/16″ was perfect for the size clock movement that I had, but yours might be different.
When Drilling, try for 90 degrees. And DON’T press too hard – it will crack the plastic (not that I speak from experience or anything).
I used duct tape to keep my game steady. And I drilled on a cardboard box so that I’d know when I went through the game.
Make sure the hole is the right size, then proceed..


Attatch the plumbing pieces to the back of your clock/game with a super duper adhesive. I ONLY used duct tape to keep them in place while the glue dries TEMPORARILY (though my dad and RedGreen would be a proponent of designing entirely out of the “handy man’s secret weapon”). One on the left side, one on the right. Make it so the bottom of the piece is a little above the bottom of the game (so that the clock will sit at an angle and not tip over). Let it dry at least 24 hours (or the recommended time on your glue)

Thread your clock pieces through according to the directions, and you are set. I’m excited to find a fun little box for these and watch the boys open their gifts!

Leave a Comment: 2 comments

Filed Under: DIY, Thrifty Christmas

Disclaimer: This post may or may not contain affiliate links.
SUBSCRIBE and never miss a thing!

Make your own fire log

12/01/2010 7:06 am · 5 comments

Thanks to Dawn for this thrifty tip…

Have you or anyone else ever wondered what you could do with all those newspapers?

log1

If you have a fireplace or firepit, you can easily turn your newspaper pile into fire starter logs.

log2
Fill up your kitchen sink with water, then take each insert individually, and roll them up. let them dry completely.

log3

And you have a Thrifty Fire Log.

Leave a Comment: 5 comments

Filed Under: DIY

Disclaimer: This post may or may not contain affiliate links.
SUBSCRIBE and never miss a thing!

faceIf you are a couponer then surely you have “given access” to your Facebook account to countless companies in your obsession pursuit of coupons and freebies.

Here’s how to get rid of them (and I’m assuming  you do want them gone?)

1. Go to your account drop down menu in upper right corner of your Facebook Account
2. Click on Application Settings (see image above)
3. You will see a list of Companies you’ve given access to in the past
4. Just click the X for the ones you would no longer like to give access to
5. That’s it you’re done!

Leave a Comment: 7 comments

Filed Under: A Thrifty Dad, DIY

Disclaimer: This post may or may not contain affiliate links.
SUBSCRIBE and never miss a thing!

Coupon Challenged sent us a DIY on how to make your own laundry soap:

One of my kids has very sensitive skin so I had to start buying the more expensive fragrance free
detergents for our laundry. And why if they are leaving something out do you have to pay more for it? Anyway. I decided to try and make my own detergent to save money over the expensive store bought bottles. We have now been using my home-made recipe for two years and my daughter has had no problems with it and it is so inexpensive and does a great job. I figure I have spent less than $10 a year to make our detergent. I have had the box of Borax for the entire time and I believe it was only about $5-$6 dollars to buy it. Below is the recipe.
Hot Water

felszote
1/2 grated bar of Fels Naptha or Zote laundry bar soap (Zote is only .59 at the 99cents store)
1 cup Arm & Hammer Washing soda (I just use a couple of heaping scoops of Oxy Clean cause I couldn’t find the washing soda)

borax
1/2 cup of Borax
Take a very large cooking pot and fill about a third full with water and put on the stove to heat. Grate the bar soap and dissolve in water. You don’t have to boil it just get it hot enough to dissolve the soap. After that is done turn off the flame and pour in the other ingredients and stir to dissolve. Then add enough hot water to again double the amount. Let sit a few hours or over night. It will thicken a great deal. If it is too thick to pour just keep dilluting and you can even just heat it up a little. That is what I do. Then I take my funnel and pour into some empty laundry containers I saved and fill about half way and fill the rest with hot water and shake. I keep a really big container to just pour in the concentrate and refill my bottle as needed dilluting with half water and shaking well. Use a full cap or around a 3/4 cup amount per load. Some people like to add essential oils for fragrance but that is what I am trying to avoid.  The detergent does not suds up but that is not what cleans your clothes. Our clothes are as clean as before, my daughter is better off and I save a lot of money making my own. Less plastic bottles used too. I have to make it about every 6 weeks or so but it takes only a few minutes.

Leave a Comment: 9 comments

Filed Under: DIY, Guest post

Disclaimer: This post may or may not contain affiliate links.
SUBSCRIBE and never miss a thing!

DIY – Crab Gun

08/09/2010 2:01 pm · 8 comments

Since our vacation is coming up, we wanted to do some fun inexpensive things at the beach. No one in our family has tried clams, much less know if we like them, out side of clam chowder which we enjoy. So one thing we learned when we where at the beach last time was claming, with a “Clam Gun”. No it’s not something you shoot. It is a plastic or metal tube that you push into the ground and pull up the clams with. In this post I’ll show you step by step how to make it, and in another later on I’ll show you the results.
First: Don’t let your kids play with power tools!
815

Next go to you local hardware store and pick up:

(2) 2 inch bolts that are 1/4 in diameter

(2) 1/4 inch nuts

(4) washers – I got a hybrid washer that was metal on one side and rubber on the other (helps with keeping tube airtight)

(2) 1 inch screws

(1) 4 inch PVC pipe (at least 2 feet long) many hardware stores have short pre-cut pipes that are cheap

(1) 1 inch PVC pipe (at least 1 foot long)

(1) 4 inch PVC cap that fits your larger 4 inch pipe (to plug one end)

PVC glue kit (one is purple cleaner, and one is the glue)

Duct Tape

1/4 inch drill bit

3/8 inch drill bit

Drill, saw to cut pipe, tape measure, marker, wrench ( optional – grinder, or grinder disk) [click to continue…]

Leave a Comment: 8 comments

Filed Under: A Thrifty Dad, DIY

Disclaimer: This post may or may not contain affiliate links.
SUBSCRIBE and never miss a thing!